These forums were permanently set to read-only mode on July 20, 2022. From that day onwards, no new posting or comment is allowed on the site, but the historical content remains intact and searchable.

A new location for posting questions about PlanetPress Suite is now available:

OL Learn - PlanetPress Classic (opens in new tab)

Topic Options
#24533 - 04/15/08 04:12 PM upc/ean code 128
bschwall Offline
Junior Member

Registered: 11/21/07
Posts: 8
I am trying to print a UPC/EAN code 128 barcode for a Parcel mailing. But when the post office scans the barcode they tell me it's missing the function code. "FNC01". Anyone know how to do this. I tried use the code128 function but the postal still has problems scanning it.

#24534 - 04/17/08 11:07 AM Re: upc/ean code 128
Raven@Curtis Offline

Registered: 07/09/07
Posts: 33
Loc: Minnesota, USA
Below is all I could find on a FNC01. Not sure how to add the special character in PrintShop. But, maybe this will help someone help you out. Good luck!

UCC/EAN/GS1-128 bar codes always contain a special non-data character known as function 1 (FNC 1), which follows the start character of the bar code. It enables scanners and processing software to auto-discriminate between UCC/EAN/GS1-128 and other bar code symbologies, and subsequently only process relevant data.

The UCC/EAN-128 specification uses the same code set as Code 128, however a special character (function 1) is used as part of the start code in the symbol. In addition, UCC/EAN-128 symbols utilize standardized application identifiers (AI

#24535 - 04/17/08 03:55 PM Re: upc/ean code 128

Hi bschwall,

From your post I understand that you are able to print the barcode, that the postmaster is able to read it with a barcode scanner, but he gets the wrong information.

You will find the encoding table for code 128 barcode here :

Of course you may find it elsewhere on the Internet. From the encoding table, you'll find that the code to add the FNC1 is 0202 (ASCII), 00CA (Unicode),